Mount your Bee

Tips to get started with your Bee

Powering up

1. Locate the 12 volt accessory outlet in your vehicle

2. Plug in the included outlet adaptor

3. Locate the power port on the underside of the Bee and plug in the other end of the cord.

There are two USB-C outlets on the Bee, be sure the power cord is plugged into the one on the right labeled “Power”

LED for Power

LED	Definition
Solid Red	✅ Power is Good
Breathing Red Flicker (over 4 seconds)	✅ Power is Good
No Red	No Power
Short Red Flicker (1 second on 1 second) off	Power mismatch and will not power
Quick Flicker (300ms on 300ms off)	Short condition in Bee

The Bee is designed to be powered using a 12 volt accessory outlet. While the Bee may be powered using a USB-C charging port, not all vehicles supply enough power to these ports to successfully power the Bee.

The Bee accepts a maximum direct voltage of 20V, which is safely provided with the included power adapter. Some vehicles output more than 20V through accessory outlets. Damage to the Bee may occur if powered at greater than 20V. Reference your vehicle’s owner’s manual to confirm the voltage of your outlets and charging ports prior to installation.

Approved vehicles mount positions

Vehicles with at least four wheels are currently approved including cars, vans and trucks of all sizes.

Vehicles that do not have four wheels are not approved at this time. This includes: bicycles, e-bikes, scooters, motorcycles.

High-quality usable imagery begins with great mount positions. There are currently two approved mount positions (as shown below).