Assemble the Bee
Tips to get started with your Bee
Last updated
Tips to get started with your Bee
Last updated
Bee device
Safety Pamphlet
12/24V Auxiliary Power Cord
Car Mount
Bee Mount Bracket and 3 screws
2 Allen Wrenches
SIM slot cover and 2 screws
Screwdriver
Before you begin, locate required parts and tools included in the Bee box
Mounting bracket
Large mounting screw
2 small mounting screws
2 included allen keys
Suction mount
Locate the mounting treads on the top of the Bee housing
Lift both of the magnetic sides of the mounting bracket up.
Place the bracket on the device and align the holes of the bracket with the mounting threads of the Bee.
Use the 2 small screws and small allen key to attach the mounting bracket to the Bee
Once attached, lower both sides of the mounting bracket to reveal the center mounting thread
Use the large mounting screw and allen key to attach
Raise the magnetic sides of the mounting bracket again and the Bee is now ready to attach to the included mount.
Take the included suction mount and remove the thumbscrew at the bottom
Slide the prongs at the end of the mount into the mounting bracket
Align holes of the bracket and mount, thread the thumbscrew through and retighten. (Be careful, as the cap on the other end can come loose while tightening)
See here for the Bee's